7 Mistakes to Avoid When Cleaning Your Windows

Maybe you don’t need to update your windows, they just need a good cleaning. This can be a good way to make your home look nicer and let in more light. But if you are not careful, you could damage your windows. People often make the same mistakes when cleaning their windows, which can lead to scratched glass, cloudy film, or even cracked panes. We’ve put up a list of seven frequent errors that individuals make when cleaning their windows, as well as how to avoid them.

Photo of a modern dining area
After cleaning your windows the space will feel so much brighter and even larger! Photo: Image by Pexels from Pixabay

1. Not Dusting First

One of the most common mistakes people make when cleaning their windows is failing to dust them first. Dust can build up on window sills, ledges, and frames, and if you try to clean your windows without dusting first, you’ll just end up pushing the dust around. Use a soft cloth or duster to remove any dust from these surfaces before you start cleaning your windows. Other surfaces in your home, such as ceiling fans and blinds, should also be dusted before you start cleaning your windows.

2. Using the Wrong Cleaning Solution

You might be surprised to learn that you should never use soap and water to clean your windows. Soap can leave behind a film that will attract dust, making it difficult to rinse off completely. This film can cause your windows to look cloudy. Instead of soap and water, use a vinegar and water solution or a commercial window cleaner. Be sure to read the labels on commercial cleaners to make sure they are safe for use on your particular type of windows.

3. Scrubbing Too Hard

When you are cleaning your windows, it’s important to be gentle. Scrubbing too hard can damage the glass, leaving behind scratches or even cracks. If you are using a cleaning solution, apply it with a soft cloth. When you are rinsing your windows, use a soft spray from a hose or bucket rather than scrubbing the glass.

4. Not Rinsing Thoroughly

Once you have applied your cleaning solution and scrubbed your windows, it’s important to rinse them thoroughly. If you don’t rinse all of the cleaners off, it can dry on the glass and leave behind a film. This film can cause your windows to look cloudy or streaky. When rinsing, be sure to use clean water and spray from top to bottom so that any cleaner that runs down the glass is rinsed away.

5. Drying with a Dirty Cloth

After you have rinsed your windows, it’s important to dry them immediately. If you let them air dry, water spots can form on the glass. Use a clean, soft cloth to dry your windows. Cotton towels or lint-free clothes work well for this purpose. Avoid using a paper towel, as these can leave behind lint. If you have any hard-to-reach windows, a squeegee can be used to remove the water.

6. Forgetting the Edges

It’s easy to forget about the edges of your windows when you are cleaning them. However, your windows will look streaky if you don’t clean the edges. Use a soft cloth or cleaning brush to clean the edges of your windows, paying special attention to the corners. If you find it hard to clean it by yourself, hire a professional window cleaning company. Gutter Vacuuming in Northampton is experienced in cleaning all types of windows including skylights, shopfronts, and conservatories.

7. Cleaning in Direct Sunlight

When you are cleaning your windows, it’s important to avoid doing so in direct sunlight. The sun can cause cleaners to dry too quickly, which can leave streaks or spots on your windows. It’s best to clean your windows in the morning or evening when the sun is not as direct. If you must clean your windows during the daytime, be sure to do so in a shady area.

Cleaning your windows doesn’t have to be difficult. There are a few simple things you can do to avoid common mistakes. By dusting your windowsills, frames, and ledges first, using the right cleaning solution, being gentle while scrubbing, and rinsing thoroughly, you can clean your windows without damaging them. And by drying your windows immediately and paying attention to the edges and corners, you can avoid streaks and ensure a thorough cleaning.